xtremeDB 16 inputs, CANopen, Base Address 20
xDB-16-ADI CANOPEN
Mechanical Data Dimensions 97 x 265 x 34 mm Weight 680 g... more
Product information "xtremeDB 16 inputs, CANopen, Base Address 20"
Mechanical Data | |
---|---|
Dimensions | 97 x 265 x 34 mm |
Weight | 680 g |
Material (Housing) | PA, reinforced |
CAN / Sensor / Module Connector | DT-4 |
Power Connector | DT-18 (A-cod.) |
IO connector | DT-4 |
Electrical Data | |
Operating Voltage | 8 … 32 V DC |
Operating Current per Contact / Potential (max.) | 13 A |
Sum Current (max.) | 13 A |
Supply Protection | Reverse polarity protection |
Block diagnoses | Undervoltage | Overvoltage | Overtemperature |
LED Indicators | Power: blue | Bus: green | Status: green | Signal: yellow | Error: red |
Inputs | |
Total number of inputs | 16 |
Number of digital inputs DI | 6 |
Number of analog inputs AI | 8 |
Range analog value | 4...20 mA | 0…5 V / 0…10 V / 0…32 V |
Number of frequency inputs FRQ | 2 |
Frequency Range | 10...3.000 Hz |
Input diagnoses | Undervoltage | overvoltage | short circuit |
Environmental Conditions | |
Protection Class | IP67 | IP68, IP69K (with MDC cordsets) |
Ambient temperature | -40 °C…+80 °C |
Storage temperature | -40 °C…+85 °C |
Standards & Approvals | |
EMC | EN 61000-6-2 | IEC/EN 61000-6-3 | EN 61000-6-4 | ISO 13766-1 | ISO 13766-2 |
Our comment on "xtremeDB 16 inputs, CANopen, Base Address 20"
This input module from the xtremeDB series offers 16 freely configurable input signals and a SAE J1939 connection. Eight inputs can be used as analog inputs for current or voltage measurement or as ratiometric inputs. Eight further inputs can be configured as digital plus (PNP) or minus switching (NPN) inputs. Two of these digital inputs can also be configured as frequency inputs or counters.
Suitable For: | CCpilot V1200, xtremeDBmini, CCpilot V700, CCpilot V1000 |
Product Family: | xtremeDB |
Inputs: | 16 |
Port Number: | 8 |
Interfaces: | CAN |
Connection: | DT-4, DT-18 |
Protocol: | CANopen, CAN Layer 2-B |
Baudrate: | 250, 500 kbit/s |
Input Signal Type: | DI, DI/AI, DI/FRQ/CNT |
Auxiliary Voltage: | 8 … 32 V DC |
Housing Material: | Polyamide, reinforced |
Operating Temperature: | -40°C ... +80°C |
IP Rating: | IP67, IP68, IP69K |
Mounting system: | 2x 6 mm round hole + 1x slotted hole |
Standards / Approvals: | ISO 13309, EN ISO 13766-2, EN ISO 13766-1 |
Related links to "xtremeDB 16 inputs, CANopen, Base Address 20"
- Questions concerning this product?
- #Download EU-Konformitätserklärung | Declaration of conformity
- #Download UKCA-Konformitätserklärung | Declaration of conformity
- Datenblatt | Datasheet
- Download CAD | STEP- & DXF-Datei | STEP- & DXF File
- Download CANopen | Symbol & dbc Datei | *.sym & *.dbc file
- Download Configuration & Test | Quickstart Guide Block Tool EN
- Download EPLAN-Datei | EDZ-File
- Download Firmware | DPLoader Quickstart DE
- Download Firmware | DPLoader Quickstart EN
- Installationsanleitung | Installation Manual
- EPLAN Vorschau | Preview EPLAN project
- Download EPLAN-Musterprojekt | sample project
- Handbuch | User Manual CANopen DE
- Handbuch | User Manual CANopen EN
- Handbuch | User Manual J1939 / CANopen EN
- Produkt Flyer DE
- Product Flyer EN
- Download Codesys | Demoprojekt | Demo project - xtremeDB on CCPilot
- Download Configuration & Test | Block Tool for Windows
- Download Firmware | DPLoader Update Tool
- Further products by Data Panel Corp.
Features: "xtremeDB 16 inputs, CANopen, Base Address 20"
Suitable For: | CCpilot V1200, xtremeDBmini, CCpilot V700, CCpilot V1000 |
Product Family: | xtremeDB |
Inputs: | 16 |
Port Number: | 8 |
Interfaces: | CAN |
Connection: | DT-4, DT-18 |
Protocol: | CANopen, CAN Layer 2-B |
Baudrate: | 250, 500 kbit/s |
Input Signal Type: | DI, DI/AI, DI/FRQ/CNT |
Auxiliary Voltage: | 8 … 32 V DC |
Housing Material: | Polyamide, reinforced |
Operating Temperature: | -40°C ... +80°C |
IP Rating: | IP67, IP68, IP69K |
Mounting system: | 2x 6 mm round hole + 1x slotted hole |
Standards / Approvals: | ISO 13309, EN ISO 13766-2, EN ISO 13766-1 |
Related links to "xtremeDB 16 inputs, CANopen, Base Address 20"
- Datenblatt | Datasheet
- EPLAN Vorschau | Preview EPLAN project
- Handbuch | User Manual CANopen DE
- Handbuch | User Manual CANopen EN
- Handbuch | User Manual J1939 / CANopen EN
- Installationsanleitung | Installation Manual
- Product Flyer EN
- Produkt Flyer DE
- Further products by Data Panel Corp.
- Questions concerning this product?
Available downloads:
- Download CAD | STEP- & DXF-Datei | STEP- & DXF File
- Download CANopen | Symbol & dbc Datei | *.sym & *.dbc file
- Download Codesys | Demoprojekt | Demo project - xtremeDB on CCPilot
- Download Configuration & Test | Block Tool for Windows
- Download Configuration & Test | Quickstart Guide Block Tool EN
- Download EPLAN-Datei | EDZ-File
- Download EPLAN-Musterprojekt | sample project
- Download Firmware | DPLoader Quickstart DE
- Download Firmware | DPLoader Quickstart EN
- Download Firmware | DPLoader Update Tool
Legal information:
Nachstehend die Links zu den kompatiblen Leitungen für unser xtremeDB Modul:... mehr
Nachstehend die Links zu den kompatiblen Leitungen für unser xtremeDB Modul:
> Link xDB Signal-Leitungen
> Link xDB CAN-Leitungen
Below are the links to the compatible cables for our xtremeDB blocks:
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Coming soon
Hint!
Hint!
Hint!
Coming soon
Hint!
Hint!
Hint!
Coming soon
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Viewed