Powerkey 6-8-10 pos. Keypad, DT-4, CAN

SOFTWARE FEATURES CAN and RS485 Keypad Addresses – Assign any valid CAN (J1939) address to the keypad while also assigning the same or a different RS485 address. Communicate on either BUS simultaneously. CANopen Communications Protocol – Fully compliant with Device Profile 401d. J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate. Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch. Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages but can be adjusted in a wide range. Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages but can be adjusted in a wide range. PowerKey1000 is the flagship model for Blink Marine’s IP67 keypads. It boasts 10 keys and is available with CANopen and J1939 protocols. Compact and elegant, the rubber of the PowerKey 1000 can be personalized for both the icons and the numbers of led assigned to each individual key. The keypad is also clearly visible in the dark thanks RGB backlight. HARDWARE FEATURES IP67/IP69K rating – Guaranteed to be dust tight and sealed against water immersion to a depth of 1 meter for up to 1 hour. UV Protected – UVB 400 hours: Keypad is highly resistant to deterioration caused by exposure to sunlight.