Our Most Powerful Display Yet maximatecc's most advanced engine monitoring system allows you... more
Product information "maxAI™ 430 J1939 CAN Bus Display"
Our Most Powerful Display Yet
maximatecc's most advanced engine monitoring system allows you to fully customize your display to suit your application. The maxAI 430 is available in four models to fully integrate with your vehicle. The vibrant 4.30" TFT display provides the highest quality visuals to optimize performance and efficiency.
Our comment on "maxAI™ 430 J1939 CAN Bus Display"
PROCESSING | |
Main Processor | Micro-controller based on ARM® Cortex®-M7 32-bit |
Internal Memory | 1MB RAM, 2MB Flash |
External Memory | 2MB SDRAM, 16MB Flash, 64KB EEPROM |
DISPLAY | |
Type | Premium TFT |
Size & Resolution | 4.3" diagonal, 480x272 px, 75x75x75 multi-viewing angle |
Color Depth | 24-bit RGB |
Contrast Ratio | 500:1 |
Brightness | 800 NITS |
Dimming | 10-100% manually controlled via keypad |
SOFTWARE | |
Operating System | Free RTOS |
Application Software | maxAI Configurator, maxAI Design Studio |
HMI | |
Keypad | 4 button keypad: navigate/select menu items |
INTERFACES | |
CAN | 2 CAN, J1939, standard 250 kbps or 500 kbps |
USB | USB 2.0 slave (Boot loader and SW configuration support) |
Bluetooth | 430v, 430iv only: Bluetooth 4.2 (SW configuration support) |
Video Input | 1 analog PAL/NTSC (rear backup camera) |
Power Supply | 12 and 24 volt systems, 9-32 VDC |
Connectors | 1 Deutsch DT06-08SA connector, 1 Deutsch DT06-6S connector |
Warning Lights | 1 warning light indicator (amber and red) |
Warning Icons | 430 & 430v: 21 on-screen icons 430i & 430iv: 20 LED warning lights, black dead front |
Input | 5 configurable inputs: voltage, resistance, frequency and digital, one 4-20mA current input |
Output | 1 config. output, low-side mode up to 1A, high-side mode up to .5A |
ENVIRONMENT | |
IP Class | IP67 (front) & IP66 (rear with connectors) |
EMS Conformity | ISO 13766 (emissions) SAE J1113-21 (immunity) |
SAE Standard | Vibration, UV, salt spray and chemical compatibility |
Temperature Range | -20 to 70°C (operational) , -30 to 85°C (storage) |
CASING | |
Housing Material | Black PC/ABS Plastic, UV Resistant |
Cover Lens | Polycarbonate with anti-scratch and anti-fog treatment |
Mechanical Installation | Flush/Panel Mounting |
W x H x D (in/mm) | 430, 430v: 5.162 (131.11) x 4.29 (108.97) x 1.63 (41.33); 430i, 430iv: 5.940 (150.88) x 4.54 (115.32) x 1.63 (41.33) |
Weight (oz/g) | 430, 430v: 9.8oz/277g; 430i, 430iv: 10.5oz/293g |
Product Family: | maxAI |
Processor: | i.MX 7 32-bit |
Interfaces: | 2x CAN |
Auxiliary Voltage: | 9 ... 32 V DC |
Display: | 4.3”, 480x272 px, 75x75x75 multi-viewing angle |
RAM: | 2 MB SDRAM |
Storage: | 16 MB |
Module Side Type: | DT Socket |
Module side coding: | A |
Module Side Pin #: | 6, 8 |
Inputs: | 5 |
Input Signal Type: | RTD, DI/AI |
Outputs: | 1 |
Output Signal Type: | DO [0.5 A LS / 1 A HS] |
Programming Languages: | STMCubeIDE 32, TouchGFXDesigner, maxAI Design Studio |
Protocol: | SAE J1939, CANopen, CAN Layer 2-B, Ethernet, ISOBUS |
Baudrate: | 250, 500 kbit/s |
Housing Material: | plastic |
Standards / Approvals: | EN ISO 13766-1, SAE J1113-21 |
Related links to "maxAI™ 430 J1939 CAN Bus Display"
- Questions concerning this product?
- #Download EU-Konformitätserklärung | Declaration of conformity
- Whitepaper
- Produkt Flyer | Product Flyer
- Produktvergleich | Product Comparison
- Konfigurationstool | Configuration Tool
- Download CAD STP-Datei | STP File
- Technisches Handbuch | Technical Manual
- Handbuch Konfigurationstool | Manual Configuration Tool
- Download Produktdateien | Product Files
- Further products by maximatecc
Features: "maxAI™ 430 J1939 CAN Bus Display"
Product Family: | maxAI |
Processor: | i.MX 7 32-bit |
Interfaces: | 2x CAN |
Auxiliary Voltage: | 9 ... 32 V DC |
Display: | 4.3”, 480x272 px, 75x75x75 multi-viewing angle |
RAM: | 2 MB SDRAM |
Storage: | 16 MB |
Module Side Type: | DT Socket |
Module side coding: | A |
Module Side Pin #: | 6, 8 |
Inputs: | 5 |
Input Signal Type: | RTD, DI/AI |
Outputs: | 1 |
Output Signal Type: | DO [0.5 A LS / 1 A HS] |
Programming Languages: | STMCubeIDE 32, TouchGFXDesigner, maxAI Design Studio |
Protocol: | SAE J1939, CANopen, CAN Layer 2-B, Ethernet, ISOBUS |
Baudrate: | 250, 500 kbit/s |
Housing Material: | plastic |
Standards / Approvals: | EN ISO 13766-1, SAE J1113-21 |
Related links to "maxAI™ 430 J1939 CAN Bus Display"
- Handbuch Konfigurationstool | Manual Configuration Tool
- Konfigurationstool | Configuration Tool
- Produkt Flyer | Product Flyer
- Produktvergleich | Product Comparison
- Technisches Handbuch | Technical Manual
- Whitepaper
- Further products by maximatecc
- Questions concerning this product?
Available downloads:
Legal information:
Hint!
Coming soon
Hint!
Coming soon
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Coming soon
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Hint!
Viewed